MY new GPU

[bundydropbear]

This is what my new GTX 560 Ti will have( getting it tomorrow "wednesday 1st of june")

www.mmt.com.au/product/11E-GTX560SC

EVGA PCIe GTX560 Ti 1024MB 900MHz SC GPU
Clk: 900MHz, Shader Clk: 1800MHz
Outputs: 2 x DVI-DL, Mini HDMI 1.4a
Memory: 1024MB DDR5
256bit @ 4212MHz (138.8 GB/s)
SLI Support: 2 Way
PCB: PCIEx16, ATX, Dual Slot Fansink
Dimensions: 228.6(L) x 111.15(H) mm
PSU Req: 500W (2 x 6pin)
Includes: DVI-VGA (1), mHDMI to HDMI (1)
6pin PCI-E (2)

Then In a few weeks I'll get

www.mmt.com.au/product/21I-BX80623I72600K

Core i7-2600/3.40G/8MB/LGA1155/95W CPU Model: Intel Core i7-2600
Processor Clock: 3400MHz
Cache: 8MB Cache
Socket: LGA1155
# Cores: 4, # Threads: 8
Bus/Core Ratio: 34
Mfg: 32nm, Max TDP: 95W
Integrated GPU: Intel HD 3000
GPU Dual Display Support*: 2
(Requires Support M/B Platform)
Other Features; Turbo Boost: Yes;
SpeedStep: Yes; Hyper-Threading; Yes


www.mmt.com.au/product/21XT-CASELS-W

Xigmatek Elysium Super Tower Case Window Colour Exterior: Black Silver
Colour Interior: Black
PSU: None. (Supports 2 x P/S2 ATX/EPS)
PSU Features: Bottom & Top Mounted
M/B Support: ITX/mATX/ATX
E-ATX/XL-ATX/HPATX
Expansion Slots: 10 (4way SLI/Crossfire)
5.25" External Bays (Max): 12
3.5" Internal Bays: 4 in 3 Module x 2
Cooling: Front 120mm (2) on 4 in 3 Mod
Rear 140mm (1), Top 200mm (1)
Left Side Fan 200mm (1)
Optional Cooling: Top Replaceable
(2 x 200mm or 3 x 140mm)
Front Panel: USB 3.0 (2), USB 2.0 (2),
eSATA (1)
Waterpipe Holes: 7
Radiator Support: Yes, Top
Dimensions: 230(W) x 618(H) x 663(D) mm
Case Weight: TBA kg
Other: CPU Cut Out, Dust Filters
Hots Swap Top SATA2 HDD Dock (1)
Max Add On Card Length: Over 330mm

The Mobo/Ram/ CPU custom heat sink I haven't decide on yet, but will post here when i get them.

Will post Photos when I get it.(The GPU that is)

[[}{]Suzaku]

I usually design my computers starting at the motherboard but basing the mobo choice off the socket. You seem to design yours backwards to me